玻璃纖維三軸向織物

Fiberglass triaxial fabric

  眾杰玻璃纖維多軸向織物是由無堿玻璃纖維直接紗在0°/+45°/-45°或+45°/90°/-45°方向排列后以聚酯縫編線縫編而成，可選用短切原絲層加工成多軸向經編復合氈。適用于各種樹脂增強系統，如不飽和聚酯樹脂，乙烯基樹脂和環氧樹脂等。廣泛應用于真空，手糊，拉擠，RTM等成型產品，如船體，風電葉片，汽車部件，運動器材，大型容器及其他玻璃鋼制品。

 Fiberglass triaxial fabric is made of fiberglass direct roving parallel aligned in 0°,+45°,-45°or +45°,90°,-45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes.

基本數據

General Data

Remarks:

Roll width: Standard width in1250mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to2600mm.

Packing: Fiberglass triaxial fabric is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.

Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.